Electro Voice CPS4.10-120V

The Dynacord CPS 4.10 is a high-efficiency, compact 4-channel amplifier, delivering 1000 watts per channel in a 1U rackmount design. Engineered for performance and reliability, it is ideal for professional audio installations and distributed systems requiring 70/100V operation. The Class-D topology ensures maximum energy efficiency and reduced heat output, while the amplifier supports flexible load configurations via IRIS-Net integration with an optional RCM-810 module.

Built with installation-friendly features, the CPS 4.10 includes Phoenix-type connections for streamlined cabling, remote power-on/off contacts, and programmable power-on delay. Comprehensive protection circuitry covers thermal, overload, short circuit, high-frequency, DC, back-EMF, and inrush current conditions, ensuring stable operation in demanding environments. Rear-mounted attenuators and a switchable 50 Hz high-pass filter in Hi-Z mode add further customization. Active front-to-rear cooling with variable-speed fans completes its robust build, making the CPS 4.10 a powerful and versatile solution for complex audio systems.

• Delivers 1000 watts per channel across four independent channels

• Supports 70V/100V distributed audio systems

• Compact, rack-efficient 1U design

• Highly efficient Class-D amplifier technology

• Optional RCM-810 module slot for IRIS-Net control and monitoring

• Adjustable impedance settings via IRIS-Net (2"10 ohm)

• Rear-mounted attenuators and selectable 50 Hz high-pass filter in Hi-Z mode

• Comprehensive protection against thermal issues, overload, shorts, HF, DC, and inrush current

• Phoenix-type balanced input and output connectors

• Remote power on/off capability and programmable startup delay

• Quiet operation with front-to-rear variable-speed fans

GENERAL SPECIFICATIONS:

• 4 channel Class D amplifier in 1U rackmount chassis

• Output Power 1000 W per channel at 2 ohm 4 ohm 8 ohm 70V 100V

• Designed for both low impedance and 70 100 V distributed systems

• Rear mounted input attenuators

• Optional RCM 810 IRIS Net module slot

• IRIS Net software controlled impedance selection from 2 to 10 ohm in 0.1 ohm steps

• Remote power on off contact

• Programmable power on delay

POWER OUTPUT RATINGS:

• 1000 W per channel at 2 ohm 4 ohm 70V 100V at 1 kHz THD 1 percent

• 500 W per channel at 8 ohm at 1 kHz THD 1 percent

• 900 W per channel at 4 ohm 70V 100V from 20 Hz to 20 kHz THD less than 0.2 percent

• 450 W per channel at 8 ohm from 20 Hz to 20 kHz THD less than 0.2 percent

• 2000 W bridged at 4 ohm and 8 ohm

AUDIO PERFORMANCE:

• Frequency Response 15 Hz to 30 kHz minus 3 dB

• Signal to Noise Ratio 103 dB A weighted

• Total Harmonic Distortion 0.05 percent

• Intermodulation Distortion SMPTE 0.05 percent

• DIM 30 0.02 percent

• Slew Rate 28 V per microsecond

• Amplifier Gain 32 dB for Lo Z 33 dB for 70V 36 dB for 100V

INPUT AND OUTPUT:

• Inputs 4 electronically balanced Phoenix type

• Input Impedance 20 k ohm balanced

• Input Sensitivity 0 dBu for 2 ohm plus 3 dBu for 4 8 ohm plus 6 dBu for 70V 100V

• Maximum Input Voltage plus 22 dBu or 9.76 Vrms

• Outputs Phoenix type connectors

CONTROL AND NETWORKING:

• Network Control Optional via RCM 810 IRIS Net module

• CAN Bus Interface Optional via RCM 810

PROTECTION AND FILTERING:

• Switchable 50 Hz high pass filter in Hi Z mode

• Complete protection includes thermal overload short circuit HF DC back EMF inrush current

POWER AND COOLING:

• Mains Voltage 120 V or 220 to 240 V 50 to 60 Hz

• Cooling Front to rear airflow with variable speed fans

MECHANICAL SPECIFICATIONS:

• Height 3.47 inches or 88.1 mm

• Width 19 inches or 482.6 mm

• Depth 16.59 inches or 421.5 mm

• Weight 24.47 pounds or 11.1 kg