Zaxcom IFB300

The IFB300 is a ZaxNet transmitter that sends high-quality, fully encrypted IFB audio, timecode, and remote control commands to Zaxcom Digital Recording Wireless transmitters and ERX receivers. The signals are carried on a single RF channel ocer 2.4 GHz which can be used license-free in almost any country.

Weighing 7.3 oz, it's constructed from an impact-resistant metal casing that's cool to the touch. A bright OLED display provides easy menu navigation.

CONNECTIVITY The TA5 audio input offers balanced stereo line level or sample rate converting AES. The BNC connector provides timecode in.

New on the IFB300 is an RS422 port for direct connection to the Zaxom GUI Bridge so you can easily setup URX50/100 and remote control your wireless via any device that can access the internet.

ENCRYPTED AUDIO The IFB300 transmits using 100% digital modulation and audio is fully encrypted to keep transmissions private, just make sure you don't give the director an ERX with your teams private IFB feed

INERNAL RECORDING Audio can be simultaneously transmitted and internally recorded to a microSD card using MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to loss of power or early card removal.

THE ULTIMATE FLEXIBILITY The IFB300 and ZGB combo gives you the ultimate remote control in the palm of your hand. You can remotely chance frequency, input level gain, output power levels, and record status right from the palm of your hand!

IFB RF TRANSMITTER:

RF Power Output: 75 mW

RF Modulation: Digital Spread Spectrum

RF Frequency Range: 2.403 to 2.475 GHz

RF Frequency Step: 0.001 GHz (1 MHz)

RF Bandwidth: 1 MHz

Channel Separation: 2 MHz

Antenna Connector: 50-ohm SMA Female

Emission Designator: 180 KV2E

FCC Part: CFR Title 47, Part 15

IFB AUDIO TRANSMITTER:

Dynamic Range: 103 dB

Distortion: 0.01%

Frequency Response: 20 Hz to 12 kHz

Highpass Filter: Off or 30 to 220 Hz, Step

System Group Delay: 10 ms

IFB ANALOG OR DIGITAL AUDIO INPUT:

Connector: TA-5M

Type: Balanced

Level: -10 dBu tp +4 dBu

Impedance: 10 k Ω

ADC Bit-depth: 24 bits

ADC Sampling Rate: 48 kHz

TIMECODE I/O:

Connector: BNC

Input Level Range: 1 to 5V, P-P

Output level 2V P-P

Impedance: 75 Ω

TIMECODE READER/GENERATOR:

Clock Accuracy: 1.54 PPM (1 frame out in 6 hours)

Timecode Type: SMPTE

Timecode Frame Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF

PHYSICAL:

Weight: 7.3 oz

Dimensions: 3.6″ x 3.23″ x 1.0″

External Power: 8 to 18 VDC @ 180 mA

Internal Power: N/A

Display: Graphic LCD Panel