Lectrosonics IFBT4-VHF

In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The IFBR1a-VHF receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate.

The default frequency of the receiver is set by two rotary switches on the side panel. Up to five additional frequencies can also be programmed into the receiver memory using the scan mode. If more than one frequency is stored in the receiver, the operator can scroll through all stored frequencies by simply pressing the volume knob.

• Digital Hybrid Wireless technology*Microprocessor controlled operation

• 50 mW power output for long range use

• Pilot tone squelch control

• Multi-use XLR input jack

• Built-in microphone preamp

• DIP switch programmable intercom input

• Tx mute for frequency scrolling

• Multi-function LCD display

• Rugged machined aluminum construction

OPERATING FREQUENCIES (MHZ):

174.100 to 215.750 MHz

AVAILABLE FREQUENCIES:

239

CHANNEL SPACING:

175 kHz

RF POWER OUTPUT:

50 mW

FREQUENCY STABILITY:

±.001% (10 ppm) @ 25 C

TEMPERATURE STABILITY:

±.001% (10 ppm) from -30 C to +50 C

CHANNEL SELECTION:

Momentary pushbutton switches, tune Up and Down

COMPATIBILITY MODES (2):

• IFB

• Digital Hybrid Wireless (400 Series)

PILOT TONE:

29.997 kHz IFB & 400 MODE; each frequency has a unique pilot tone

MODULATION:

• IFB Mode: FM, ±20 kHz deviation

• Digital Hybrid Mode: ±75kHz

AUDIO FREQUENCY RESPONSE:

• IFB Mode: 100 Hz to 8 kHz, ±1 dB

• Digital Hybrid Mode: 30Hz to 20kHz ±1dB response (see Rolloff)

ROLLOFF:

Low frequency audio rolloff is menu selectable for 3 dB down at 35 Hz or 50 Hz.

AUDIO COMPRESSOR:

2 to 1 (IFB mode)

OUTPUT IMPEDANCE:

50 ohms

AUDIO INPUT LEVELS:

• 0 dBu for Line, RTS1 & RTS2

• -10 dBu for Clear Com

• -42 dBu for mic dry inputs (no phantom power)

• +/-50Vdc max

AUDIO INPUT CONFIG:

Balanced and Unbalanced, rear panel selectable for Line, Mic. RTS 1, RTS 2, and Clear Comm

AUDIO INPUT IMPEDANCE:

Greater than 2 K balanced, greater than 1 K unbalanced at any gain setting

GAIN CONTROL RANGE:

-18 dB to +24 dB (0 dB nominal center), Menu selectable

AUDIO INPUT JACK:

Standard XLR female connector

INPUT POWER:

12 to 14 VDC typical, 200 ma. max.; Max. Input Range 6 to 18 VDC

POWER INPUT JACK:

Coax type, locking LZR RL26AE

INDICATORS:

Backlit Liquid Crystal Display. Displays modulation meter, frequencies, modes, roll-off and audio level

FRONT PANEL CONTROLS:

• MENU momentary pushbutton switch

• Power OFF-TUNE-XMIT, 3 position slide switch

• Select Up momentary pushbutton switch

• Select down momentary pushbutton switch

REAR PANEL CONTROLS:

Input Mode Select, 4 section DIP switch

WEIGHT:

9 ozs.

SIZE:

5.25" L (including connectors) x 3.25" W x 1.25" H

EMISSION DESIGNATOR:

180KF3E