Cranborne Audio N22

The Cranborne Audio N22 is a compact and efficient solution for high-quality audio distribution, replacing four balanced XLR cables with a single shielded Cat 5e, Cat 6, or Cat 7 cable over distances of up to 100m (330ft). Utilizing C.A.S.T. (Cat 5 Analogue Signal Transport) technology, the N22 allows seamless transmission of balanced analogue audio between studios, live rooms, and performance spaces with minimal cable clutter. Fully passive and requiring no external power, it ensures pristine signal integrity with low-crosstalk and no high-end roll-off. The N22 also supports phantom power transmission, making it ideal for condenser microphones and DI boxes when integrated with Cranborne Audio interfaces like the 500R8, 500ADAT, and Camden EC2.

For those needing high-quality headphone distribution, the N22H builds on the N22's capabilities by incorporating a reference-grade headphone amplifier with ultra-low distortion and a flat frequency response from 0.8Hz to 250kHz. This ensures transparent, high-powered monitoring for musicians during tracking and engineers during mixing and mastering. The N22H can be powered via a 9V DC adapter or a 9V battery, providing up to 10 hours of operation in mobile or power-limited setups. Whether for studio expansion, stage wiring simplification, or deploying headphone amplification where it's needed, the N22 and N22H offer an intelligent, high-fidelity analogue signal distribution solution.

• Simplified Audio Distribution " Replaces four balanced XLR cables with a single shielded Cat 5e, Cat 6, or Cat 7 cable for up to 100m of audio transmission.

• C.A.S.T. System Integration " Uses existing network cables to transport balanced analog audio between compatible devices.

• Standalone or Expander Use " Functions independently or expands audio setups with Cranborne Audio interfaces like 500R8 and 500ADAT.

• Reduced Cable Clutter " Minimizes cable mess while maintaining high-quality signal transmission.

• No External Power Required " Operates passively with no need for additional power sources.

• Phantom Power Support " Transfers 48v phantom power for condenser microphones and DI boxes.

• Flexible Studio Setup " Enables easy audio distribution to live rooms, vocal booths, and other recording spaces.

• Headphone Distribution (N22H Model) " Features a high-quality headphone amplifier for tracking, mixing, and mastering.

• Expandable System " Works with other Cranborne Audio C.A.S.T. products to enhance studio or live setups.

GENERAL FEATURES:

• Standalone 4-channel Cat 5 snake and audio distribution system

• Utilizes C.A.S.T. (Cat 5 Analogue Signal Transport) for audio routing

• Replaces 4 balanced XLR cables with a single shielded Cat 5e, Cat 6, or Cat 7 cable

• Passive operation; requires no external power

• Compatible with distances up to 100m (330ft)

CONNECTIVITY:

• Inputs: 4 x Balanced XLR/¼" TRS Combo Inputs

• Outputs: 4 x Balanced XLR/¼" TRS Outputs

• C.A.S.T. Connections: 2 x RJ45 Shielded Cat 5e/Cat 6/Cat 7 ports

• Fully compatible with other Cranborne Audio C.A.S.T.-enabled products

SIGNAL TRANSMISSION:

• Balanced analog audio transmission via shielded Cat 5e, Cat 6, and Cat 7 cables

• Optimized signal integrity with minimal crosstalk and no high-end roll-off

• Supports 48V phantom power transmission for condenser microphones and DI boxes

USE CASES:

• Acts as a standalone Cat 5 snake for connecting different locations

• Functions as a C.A.S.T. expander for Cranborne Audio 500R8, 500ADAT, and Camden EC2

• Can be used in studios and live settings for flexible and cost-effective audio distribution

• Supports stereo monitor mix transmission from interface to remote outputs

PHANTOM POWER:

• Transfers 48V phantom power over Cat 5e, Cat 6, and Cat 7 cables

• Compatible with both Cranborne Audio preamps and third-party preamps/audio interfaces

• Headphone Distribution (N22H Model)

• Built-in reference-grade headphone amplifier (N22H only)

• Power output: Up to 950mW per ear

• Frequency response: 0.8Hz to above 250kHz

• THD+N: 0.0009% (100 kOhm load)

• Operates via 9V DC power supply or 9V battery (up to 10 hours of use)

ADDITIONAL C.A.S.T. APPLICATIONS:

• Compatible with Camden EC2's C.A.S.T. system for remote preamp positioning

• Can extend preamp inputs and outputs to vocal booths, live rooms, hallways, or reverb chambers

• Works as an alternative to bulky analogue multicore systems