DPA 4099-DP-1-101-CM

The DPA 4099-DP-1-101-CM brings the exceptional clarity and sonic fidelity of the CORE+ series to a convenient, instrument-friendly setup. Specifically tailored for louder acoustic instruments, this model includes the 4099 CORE+ microphone with a Loud SPL rating-able to handle up to 145 dB peak SPL-making it a perfect match for everything from percussion and brass to woodwinds and amplified acoustic guitars.

Included with this package is the CM-CLIP, a versatile clamp mount that attaches securely to various instrument bodies without causing damage, allowing for precise mic placement with minimal setup time. The microphone's supercardioid pattern ensures excellent isolation from nearby sources, while the upgraded shock mount and gooseneck design offer enhanced stability and easy, one-handed positioning.

The 4099-DP-1-101-CM is a reliable and flexible choice for both stage and studio, combining DPA's natural sound reproduction with smart mounting solutions for high-SPL environments. Whether you're performing live or recording intricate instrumental passages, this system ensures that every nuance is captured with clarity and balance.

• Captures natural, high-quality sound from loud acoustic instruments

• Handles peak sound pressure up to 145 dB without distortion

• Clamp mount securely attaches to a wide range of instruments

• Supercardioid pattern offers focused pickup with strong off-axis rejection

• CORE+ technology improves clarity, dynamic range, and headroom

• Gooseneck with locking system allows precise, stable mic placement

• MicroLock connector ensures reliable cable connection and wireless compatibility

• Enhanced shock mount design minimizes handling and vibration noise

• Ideal for use on brass, drums, percussion, and other high-SPL instruments

MICROPHONE TYPE:

• Prepolarized condenser

• Pressure gradient principle

POLAR PATTERN:

• Supercardioid

FREQUENCY RESPONSE:

• 20 Hz to 20 kHz

• Effective range plusminus 2 dB at 20 cm: 80 Hz to 17 kHz with 2 dB boost at 10 to 12 kHz

SENSITIVITY:

• 6 mV per Pa

• Minus 44 dB re 1 V per Pa

EQUIVALENT NOISE LEVEL:

• Typical 23 dBA

• Maximum 26 dBA

DISTORTION THD:

• Less than 0 point 5 percent: 135 dB SPL RMS, 138 dB SPL peak

• Less than 1 percent: 138 dB SPL RMS, 141 dB SPL peak

• Max SPL at 10 percent THD: 145 dB SPL peak

DYNAMIC RANGE:

• Typical 118 dB

OUTPUT IMPEDANCE:

• MicroLock: 30 to 40 ohm

• With DAD9099 or DAD9001 XLR Adapter: 100 ohm

CABLE DRIVE CAPABILITY:

• Up to 300 meters with DAD9099 or DAD9001

OUTPUT BALANCE:

• Balanced with XLR Adapter

CMRR:

• Greater than 60 dB from 50 Hz to 15 kHz

POWER REQUIREMENTS:

• Wireless: 5 to 10 V via DPA adapter

• Wired with XLR: P48 phantom power minimum 12 V

CURRENT CONSUMPTION:

• Microphone: 1 point 5 mA

• With XLR Adapter: 3 point 5 mA

CONNECTOR:

• MicroLock

MOUNT TYPE:

• Clamp Mount (CMCLIP)

• Weight of CMCLIP: 16 g

DIMENSIONS:

• Microphone diameter: 5 point 7 mm

• Microphone length: 50 mm

• Gooseneck length: 140 mm

• Cable length: 1 point 8 m

• Cable diameter: 1 point 6 mm and 2 point 2 mm

WEIGHT:

• Microphone: 18 g

• Microphone with Clamp Mount: 34 g

ENVIRONMENTAL:

• Temperature range: minus 40 to 45 Celsius

• Relative humidity: up to 90 percent

POLARITY:

• Positive voltage at MicroLock pin for positive sound pressure

IDENTIFICATION:

• Red marking on gooseneck for Loud SPL

TECHNOLOGY:

• CORE Plus

• MicroLock connector

• IP58 certified

• Enhanced gooseneck and shock mount system for vibration isolation