Tascam MM-2D-X

The TASCAM MM-2D-X is a powerful 2-channel Dante interface featuring professional-grade XLR connections for mic and line inputs/outputs, complete with phantom power support and remote mic gain control. Designed for high-performance audio networks, it offers 4-channel Dante I/O and a built-in 6-in/4-out DSP matrix mixer-all housed in a compact half-rack enclosure.

Ideal for contractor installations and live environments, the MM-2D-X delivers exceptional signal quality up to 24-bit/96kHz and features extensive DSP options including compression, EQ, delay, limiter, and auto-leveling. With PoE support, flexible scene presets, and control via TASCAM DCP CONNECT or EZ CONNECT software, this converter is a versatile and scalable solution for any Dante-enabled audio system.

• 2 Mic/Line Inputs with Phantom Power (XLR): Professional-grade XLR inputs with +48V phantom power and remote gain control.

• 2 Line Outputs (XLR): Balanced analog outputs for routing to powered speakers or amplifiers.

• 4 Dante Inputs and 4 Dante Outputs: Full Dante I/O for integration into audio-over-IP systems.

• Built-In DSP and 6x4 Matrix Mixer: Mix and route any input to any output with ducking, noise compensation, and more.

• Full DSP Processing Suite: Includes EQ, compressor, auto-level, high/low pass filter, limiter, and delay.

• Premium TASCAM Mic Preamps: Low-noise, high-headroom preamps with wide gain range for studio-quality capture.

• PoE Powered (Power over Ethernet): Operates through a single network cable for power and data-no extra adapter needed.

• Remote Control via Software: Configure and monitor using TASCAM DCP CONNECT or EZ CONNECT on desktop or mobile.

• Compact Half-Rack Form Factor: XLR connectivity in a small chassis with included surface-mount brackets.

• Scene Memory and Visual Indicators: Save up to 50 system presets and monitor signal flow with status LEDs.

GENERAL SPECIFICATIONS:

• 2 channel mic line input with phantom power support XLR

• Remote mic gain control via Dante or software

• 2 channel line output

• 4 Dante input and output channels

• Built in DSP with 6 in 4 out matrix mixer

• 24 bit resolution with sampling rates of 44.1 48 88.2 96 kHz

• Half rack mountable size

• Signal indicators for input and output monitoring

• Scene preset function for up to 50 presets

• Supports Dante daisy chaining

• PoE Power over Ethernet class 0 support

• Compatible with TASCAM DCP CONNECT and EZ CONNECT software

• Remote control via Dante

• Compatible with Windows macOS iOS and Android

• Includes surface mount brackets

• Optional rack shelf AK RS1 for dual unit installation

AUDIO PERFORMANCE:

• Mic amp EIN minus 125 dBu

• Frequency response 20 Hz to 20 kHz at 44.1 48 kHz and 20 Hz to 40 kHz at 88.2 96 kHz

• Distortion THD plus N 0.005 percent

• Signal to noise ratio 105 dB

• Crosstalk 100 dB

• Dynamic range 105 dB

ANALOG INPUTS:

• Connector XLR 3 31 balanced

• Minimum input level minus 74 dBu

• Maximum input level plus 26 dBu

• Input impedance 2 k ohms or higher

ANALOG OUTPUTS:

• Connector XLR 3 32 balanced

• Output impedance 200 ohms or lower

• Nominal output plus 4 dBu or plus 6 dBu depending on reference level

• Max output levels: plus 15 dBu at minus 9 dBFS, plus 18 dBu at minus 14 dBFS, plus 20 dBu at minus 16 dBFS, plus 22 dBu at minus 18 dBFS, plus 24 dBu at minus 20 dBFS

DANTE INTERFACE:

• Connector RJ45

• Protocol Dante

• Ethernet standard 1000BASE T IEEE 802.3ab

• Cable requirement Cat 5e or higher STP cables

POWER AND ENVIRONMENTAL:

• Power supply PoE class 0 or optional TASCAM PS P1220E

• Power consumption 6W

• Operating temperature 0 to 40 degrees Celsius

• Dimensions 214 x 44.45 x 136.1 mm

• Weight 878 grams

INCLUDED ITEMS:

• MM 2D X unit

• Installation brackets x 2

• Owner's manual with warranty