Tascam MM-4DIN-E

The TASCAM MM-4D/IN-E is a compact and versatile 4-channel mic/line input Dante converter, tailored for professional AV installations and networked audio environments. Featuring Euroblock connections and phantom power support, this half-rack unit delivers clean, studio-grade audio with full 24-bit/96kHz resolution and robust DSP processing onboard.

Equipped with an 8-in/4-out matrix mixer, the MM-4D/IN-E allows seamless integration of analog and Dante inputs, with advanced DSP tools such as EQ, compression, auto-leveling, ducking, and ambient noise compensation. PoE-powered and remotely configurable via TASCAM DCP CONNECT or EZ CONNECT software, it's a perfect solution for scalable Dante systems needing flexible routing, superior audio quality, and reliable performance-all in a compact and efficient form factor.

• 4 Mic/Line Inputs with Phantom Power (Euroblock): Accepts microphones or line-level signals and supplies +48V phantom power when needed.

• Remote Gain Control: Adjust mic input levels remotely via software or Dante-compatible controllers.

• 4 Dante Inputs and 4 Dante Outputs: Fully integrates into Dante networks for flexible I/O routing.

• Built-In DSP with 8x4 Matrix Mixer: Mix multiple Dante and analog inputs to any output zone with onboard processing tools.

• Comprehensive Audio Processing: Includes EQ, compressor, auto-leveler, ducking, noise compensation, and limiter effects.

• Studio-Quality Mic Preamps: Delivers low-noise, clean gain with outstanding clarity and dynamic range.

• Powered via PoE: Operates with a single Ethernet cable for both data and power-no external adapter required.

• Remote Configuration with Control Software: Use DCP CONNECT for advanced setup or EZ CONNECT for basic volume control on any device.

• Compact, Half-Rack Design: Easily mounts under desks or in racks with included brackets.

• Status and Signal Indicators: Visual feedback for input activity, Dante connection, and network status.

GENERAL SPECIFICATIONS:

• 4 channel mic line input with phantom power support Euroblock

• Remote mic gain control via Dante or software

• 4 Dante input and output channels

• Built in DSP with 8 in 4 out matrix mixer

• 24 bit resolution with sampling rates of 44.1 48 88.2 96 kHz

• Half rack mountable size

• Signal indicators for input monitoring

• Scene preset function with up to 50 presets

• Supports Dante daisy chaining

• PoE Power over Ethernet class 0 support

• Compatible with TASCAM DCP CONNECT and EZ CONNECT software

• Remote control via GPI and Dante

• Compatible with Windows macOS iOS and Android

• Includes surface mount brackets

• Optional rack shelf AK RS1 for dual unit installation

AUDIO PERFORMANCE:

• Mic amp EIN minus 125 dBu

• Frequency response 20 Hz to 20 kHz at 44.1 48 kHz and 20 Hz to 40 kHz at 88.2 96 kHz

• Distortion THD plus N 0.003 percent

• Signal to noise ratio 108 dB

• Crosstalk 100 dB

• Dynamic range 108 dB

ANALOG INPUTS:

• Connector Euroblock balanced 3.81 mm pitch

• Minimum input level minus 70 dBu

• Maximum input level plus 26 dBu

• Input impedance 2 k ohms or higher

DANTE INTERFACE:

• Connector RJ45

• Protocol Dante

• Ethernet standard 1000BASE T IEEE 802.3ab

• Cable requirement Cat 5e or higher STP cables

CONTROL I O:

• GPI Connectors Euroblock 3.81 mm pitch

• LED output format open collector 10 ohms 48V 35mA

• SWITCH input voltage max 5.5V min high level 2.31V max low level 0.99V

POWER AND ENVIRONMENTAL:

• Power supply PoE class 0 or optional TASCAM PS P1220E

• Power consumption 7.5W

• Operating temperature 0 to 40 degrees Celsius

• Dimensions 214 x 44.45 x 136.1 mm

• Weight 885 grams

INCLUDED ITEMS:

• MM 4D IN E unit

• Installation brackets x 2

• Euroblock plugs x 4

• Cable band kit x 1

• Owner's manual with warranty