BAE 1073 - Mic Pre/EQ 19'' Rackmount Single without PSU

It seems to add subharmonics to the low end which makes the bottom end sound huge. It smoothes the top end which gives the highs a silky sheen. As well the 1073 compresses transients a little bit. It is a smooth, fat, larger than life sound. An added bonus is to use the DI inputs to fatten samples, synths and mixes since the DI can handle line levels.

The 1073 equalizer is very broadbanded and musical. It has a hi-pass filter with four frequencies- 50 Hz, 80 Hz, 160 Hz and 300 Hz. The low frequency band is shelving and has four frequencies - 35 Hz, 60 Hz, 110 Hz and 220 Hz. The low end of this equalizer is so tight that you can boost 220 Hz and not muddy up the sound. The mid band has six frequencies - 360 Hz, 720 Hz, 1.6 kHz, 3.2 kHz, 4.8 kHz and 7.2 kHz. The bandwidth is broad so you can boost or cut a lot without making things sound processed or unnatural. The hi band is shelving and is fixed at 12 kHz. It is smooth and silky and a little goes a long way.

• High Frequency: +/-16dB fixed frequency shelving at 12kHz

• Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz

• Mid Range: +/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz

• High Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz & 300Hz

• Made from an authentic reproduction of a Neve 1073 module

• Hi-Z direct inputs on the front panel

• 48v phantom power on the front panel

FREQUENCY RESPONSE:

10Hz to -3dB at 55kHz

3 BAND EQUALISER:

HF: +/-16dB fixed frequency shelving at 12kHz

LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz

MF: +/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz

HIGH PASS FILTER:

50Hz, 80Hz, 160Hz & 300Hz

MIC INPUT IMPEDANCE:

1200/300 ohms

LINE INPUT IMPEDANCE:

10k ohms

DI INPUT IMPEDANCE:

150k ohms

OUTPUT IMPEDANCE:

35 ohms

COMMON MODE REJECTION RATIO:

100dB min @ 60Hz

MAXIMUM OUTPUT LEVEL:

+27.4 dBu @ 600

POWER REQUIREMENTS:

115/230 VAC, 28W

GAIN DB:

0 to 80 dB

EQUIVALENT INPUT NOISE:

-110 dBu; Unweighted 300kHz Bandwidth

WEIGHT (SINGLE/DUAL):

6 LBS / 2.72 KG

10 LBS / 4.54 KG

DIMENSIONS IN INCHES (MODULE/RACKMOUNT):

45 mm W x 8.75 inches H x 10.5 inches D

19W x 1.75L x 9D