KRK RP8-G5

The KRK Systems ROKIT 5 Generation Five is the most advanced studio monitor in its class. Whether you're working on a chart-topping hit, a film score, or a personal project, they provide the tools you need to capture every nuance of your sound with astonishing clarity. Part of the Fifth Generation of KRK ROKIT Studio Monitors, along with the ROKIT 7 Generation Five and ROKIT 8 Generation Five, their onboard DSP technology provides three distinct Voicing Modes. Mix Mode, with flat frequency and phase response, is best for mixing, mastering, and critical listening. Create Mode is a more inspirational voicing best used for writing, producing, and casual listening. Focus Mode is a mid-focused voicing for critical analysis of the midrange band where vocals and most instruments have the most energy. The three Mix Modes eliminate the need for separate sets of monitors for different tasks. It's like having three pairs of monitors in one. The ROKIT 5 Generation Five also features 25 boundary and tuning EQ combinations that help minimize and correct problems in your acoustic environment, and with the aid of the free KRK App, they make setting up your recording environment easy and precise.

The ROKIT 5 Generation Five is fitted with a 5" woven Kevlar aramid fiber cone woofer for superior damping and modal breakup control. The 1" tweeter benefits from a highly damped acoustic silk dome diaphragm to smoothly extend the frequency range up to 40 kHz. For maximum transient response and dynamics reproduction, bi-amplified Class D power amplifiers drive the transducers evenly and more efficiently at reduced operating temperatures to ensure audio integrity during long work sessions.

The world's leading studio monitor manufacturer, KRK's sonic accuracy and performance have made them the choice of professionals worldwide for over 35 years. Experience them for yourself, and you'll agree"the KRK Systems ROKIT 5 Generation Five continues that tradition of sonic excellence.

• Three Voicing Modes: Switch between Mix, Create, and Focus modes to suit mixing, composing, or critical listening tasks.

• 25 Room Tuning EQ Presets: Fine-tune your monitor's sound to match your room and reduce acoustic problems.

• 8" Woven Kevlar Woofer & 1" Silk Dome Tweeter: Offers tight low-end and smooth, detailed highs with accurate sound across frequencies.

• Bi-Amplified Class D Amplifiers: Delivers clean, efficient power with consistent performance during long sessions.

• Front-Bass Reflex Design: Enhances bass response while allowing flexible monitor placement.

• Low-Diffraction Baffle Design: Improves stereo imaging and reduces unwanted distortion.

• Built-In Isolation Pads: Minimizes resonance and helps with proper speaker alignment.

• Grille or No-Grille Options: Includes magnetic faceplates to choose your preferred look and protection.

• Mounting Points Ready: Integrated for easy installation in immersive or surround studio setups.

• XLR/TRS Combo Input: Connects easily to professional audio equipment.

GENERAL SPECIFICATIONS:

• Active 2 Way Bass Reflex Studio Monitor

• Single unit not a pair

• Fifth Generation model

DRIVERS:

• LF Driver 8 inch woven Kevlar aramid fiber cone ferrite magnet

• HF Driver 1 inch silk dome with copper cap ferrite magnet

PERFORMANCE:

• Frequency Response plus or minus 3 dB 42 Hz to 36 kHz

• Frequency Range plus 3 minus 10 dB 32 Hz to 40 kHz

• Crossover Frequency 1.64 kHz

• Max SPL 111 dB

• Coverage Angles 148 degrees horizontal by 125 degrees vertical

AMPLIFICATION:

• Bi amplified Class D

• LF Amp Power Output 135 Watts

• HF Amp Power Output 68 Watts

• Total Rated Power Output 203 Watts at 1 percent THD plus N

• Total Dynamic Power Output 312 Watts at 10 percent THD plus N

ACOUSTIC FEATURES:

• Three voicing modes Mix Focus Create

• 25 boundary and tuning EQ combinations

• Low diffraction baffle design

• Optimized front ported bass reflex enclosure

• Acoustic foam wedge isolation pads

• Integrated mounting points for optional brackets

CONNECTIVITY:

• Balanced XLR and 1 quarter inch TRS combo analog input

• Signal to Noise Ratio greater than 94 dB balanced low sensitivity greater than 91 dB unbalanced high sensitivity

POWER REQUIREMENTS:

• Universal voltage 100 to 240 VAC plus or minus 10 percent 50 60 Hz

• Fuse Type 5 by 20 mm T2A 250V

CONSTRUCTION:

• Enclosure PVC vinyl wrapped MDF

• Baffle structurally reinforced high impact polystyrene

PHYSICAL DIMENSIONS:

• Height 15.75 inches or 400 mm

• Width 10.47 inches or 266 mm

• Depth 12.56 inches or 319 mm

• Weight 23.04 lbs or 10.45 kg

• Packaged Weight 28.66 lbs or 13 kg

• Packaged Dimensions 20.47 inches by 13.78 inches by 15.35 inches or 520 mm by 350 mm by 390 mm

ADDITIONAL FEATURES:

• Includes two magnetic faceplates for grille or no grille option

• Compatible with KRK Audio Tools App for real time acoustic analysis and EQ setup

• Universal voltage switching power supply for global use