QSC E115

It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8" compression driver attached to the 75 DMTTM waveguide assures that even distant listeners will be well covered.

E Series loudspeakers will perform very well with any quality, professional power amplifier - but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today's powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

• E Series Entertainment System - Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.

• E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:

- For PLD/CXD visit Amplifier Navigator Software

- For GXD visit the GXD Firmware Updater

• Titanium diaphragm for high fidelity and long life

• Rugged tour-grade textured paint

• Foam-lined perforated steel grill

• Available U-Style Yoke and M8 rigging kit for permanent installation

• Dual angle pole socket

MODEL:

E115

CONFIGURATION:

1 x 15-inch, 2-way, non-powered

FREQUENCY RESPONSE (-6 DB):

55 Hz - 20 kHz

FREQUENCY RANGE (-10 DB):

43 Hz - 20 kHz

POWER CAPACITY1:

continuous/peak: 500 W / 2000 W

SENSITIVITY:

97 dB, 1 W @ 1 m

COVERAGE ANGLE:

75 conical DMT

OUTPUT2 (PEAK SPL @ 1 M):

130 dB

DRIVERS:

LF:

381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil

HF:

38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver

NOMINAL IMPEDANCE:

8

CROSS-OVER:

Full-range only 1.55 kHz

INPUT CONNECTORS:

2 x NL4, 1 x barrier strip

ENCLOSURE:

Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.

DIMENSIONS:

(WxHxD) 16.5 x 28.2 x 17.5 in, 420 x 716 x 445 mm

NET WEIGHT:

31 kg / 68 lb

SHIPPING WEIGHT:

34 kg / 75 lb