Zaxcom TRXCL5

The TRXCL5 sends audio with embedded timecode to camera via a UHF signal to any Zaxcom receiver " QRX200, RX200, QRX235 or MRX/RX-4. It can also send audio and timecode via ZaxNet's 2.4 GHz signal to an ERX3TCD receiver, or remote control commands to any Zaxcom digital recording wireless transmitter.

A TA5 audio input offers balanced stereo line level or sample rate converting AES. The BNC connector provides timecode in.

New on the CL5 is an RS422 port for direct connection to the Zaxcom GUI Bridge so you can easily setup URX50/100 and remote control your wireless via any device that can access the internet.

DESIGN MATTERS Deliver pristine audio quality with the TRXCL5 wide-band camera link transmitter for sound professionals in film, television, or ENG applications. This new model covers Blocks 20 " 26, where legal.

Weighing 7.3 oz, it's constructed from an impact-resistant metal casing that's cool to the touch. A bright OLED display provides easy menu navigation.

ENCRYPTED AUDIO The TRXCL5 transmits using 100% digital modulation and audio is fully encrypted to keep recordings private.

INTERNAL RECORDING Audio can be simultaneously transmitted and internally recorded to a microSD card using MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to loss of power or early card removal.

BETTER WORKFLOW The TRXCL5 is designed to limit intermodulation which can occur when multiple transmitters are in close proximity to each other and mix together.

ADVANCED FEATURES ZaxNet allows you to send scratch-track audio, timecode, and remote control commands.

MHZ BANDS AND POWER OUTPUT In the United States, the TRXCL5 runs in the frequencies and power outputs as follows: 512.0 to 607.9 (up to 100mW) 614.1 to 615.9 (20mW) 653.1 to 662.9 (20mW)

Globally, the TRXCL5 runs between 512.0 " 698.0 MHz

TRANSMITTER:

RF Modulation: Proprietary Digital Method

TRXCL5 US RF Freq Ranges:

512.0 to 607.9 MHz

614.1 to 615.9 MHz

653.1 to 662.9 MHz

Global RF Freq Range: 512 to 698 MHz

RF Frequency Step: 100 KHz

RF Bandwidth in ZHD Mode: 50 KHz

RF Bandwidth: 200 KHz

Channel Separation in XR Mode: 400 KHz

Antenna Connector: 50 Ω SMA Female

Emission Designator: 180 KV2E

FCC Part: 74.861

TRANSMITTER AUDIO:

Dynamic Range: 114 dB

Distortion: 0.002%

Frequency Response:

Mode 0 is 20 Hz to 16 kHz / T & M Mode is 0.2 Hz to 16 kHz

System Group Delay: 3.5 ms

Audio input connector: TA5 male

Analog Input Range: -10 to +4 dBu

Analog input type: balanced line level

Audio input Impedance: 4.7 k Ω

ADC Bit-Depth: 24 Bits

ADC Sampling-Rate: 48 kHz

AES input: Balanced with sample rate conversion

Sample rate range: 32 Khz to 96 Khz

TIMECODE READER / GENERATOR:

Clock Accuracy: 1.54 PPM (1 Frame Out in 6 Hours)

Timecode Type: SMPTE

Timecode Frame-Rates:

23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF

INTERNAL RECORDING:

Media: MicroSD Card (Flash Memory)

File Format: .ZAX

Recording Time: 96 Hours (16 GB Card)

2.4 GHZ ZAXNET TRANSMITTER:

RF Frequency Range: 2.403 to 2.475 GHz

RF Modulation: Digital Spread Spectrum

RF Frequency Step: 0.001 GHz (1 MHz)

RF Bandwidth: 1 MHz

Channel Separation: 2 MHz

Sensitivity: -96 dBm

RF power output: 100 mW max

PHYSICAL / POWER:

Weight: 7.3 oz

Dimensions (H x W x D): 1"x 3.55" x 3.23"

Display: Graphic OLED

Power Output: 25 / 50 / 100 mW " Software Selectable

Power consumption: 2.13 watts

*Power measured pre-output band pass filter