AMS Neve 1073 DPA

A superb addition to the Neve outboard range, providing two of our world-famous Class A Neve 1073 microphone preamplifiers in a single rackspace. The 1073 is the mic preamp of choice for numerous leading producers and artists, delivering the unique Neve sound featured on some of the most famous recordings of the past 40 years. The big, punchy sound of the 1073 compliments any musical genre, from rock to pop, hip-hop to rap, thrash to classical. Its lush sound with classic Neve signature makes it the consummate mic pre for recording vocals, guitars, and acoustic instruments of all descriptions. With the 1073DPA, the highly sought-after 1073 mic amp sound is now available in a cost-effective 1U stereo rackmount solution, without the additional EQ found on the classic 1073 unit. The 1073DPA provides the legendary sound of Neve in a remarkably simple format. Two rear-panel Mic inputs and Line inputs feed dual Class A gain stages, with adjustable Gain control and selectable 48V available on the Mic inputs. Class A analogue outputs in XLR format are also found on the rear panel, controlled via adjustable front-panel ±10dB Trim controls. This stereo unit is the perfect solution for studios looking to bring in the very essence of the legendary Neve 1073 sound.

• Dual Mic Preamps " Features two Class A Neve 1073 mic pre-amplifiers for high-quality sound.

• Versatile Inputs " Accepts microphone, line, and instrument signals with switchable impedance.

• Classic Neve Sound " Delivers the signature warmth and depth of the legendary 1073 design.

• Phantom Power " +48V phantom power available for condenser microphones.

• Trim Control " ±10dB trim for fine-tuning input levels.

• High Headroom " Handles high signal levels with low distortion.

• Transformer-Balanced Outputs " Ensures high-quality, low-noise analog output.

• Rack-Mountable " Compact 1U 19" rack design for professional studio setups.

• Universal Power Supply " Operates on 100-240V AC without the need for voltage selection.

GENERAL:

• Dual-channel Class A microphone pre-amplifier

• Based on classic Neve 1073 design

• 1U 19" rack-mountable unit

POWER REQUIREMENTS:

• Rated Voltage: 100-240V AC

• Rated Frequency: 47-63 Hz

• Rated Current: 0.5A Max

• Primary Protection Fuse: T5AH anti-surge (20mm x 5mm ceramic)

• IEC mains connector

• Red LED power indicator (+5V healthy when illuminated)

INPUT SPECIFICATIONS:

• Mic Input: Transformer coupled

• Mic Input Impedance: Switchable 300Ω / 1200Ω (Hi-Z)

• Mic Input Maximum Level: +6dBu

• Mic Input Phantom Power: +48V switchable

• Line Input Impedance: 20kΩ

• Line Input: Electronically balanced

• Line Input Maximum Level: +26dBu

OUTPUT SPECIFICATIONS:

• Line Output: Transformer balanced

• Line Output Phase: Phase reversal available

• Line Output Minimum Peak Level: +26dBu

PERFORMANCE:

• Frequency Response (Mic, 60dB Gain, 600Ω Load): 20Hz to 20kHz ±0.5dB

• Frequency Response (Mic, 60dB Gain, 600Ω Load): 20Hz to 40kHz -3dB

• Equivalent Input Noise (Mic, 60dB Gain): <-125dB

• Total Harmonic Distortion + Noise (+20dBu into 600Ω, 50Hz to 10kHz): <0.07%

REAR PANEL CONNECTORS:

• Line Output: Male XLR

• Line Input: Female XLR and 1/4 inch jack combo

• Mic Input: Female XLR

• Mic Input Maximum Level: +6dBu

• Mic Input Impedance: 300Ω or 1200Ω

DIMENSIONS & WEIGHT:

• Depth: 254mm (10")

• Height: 45mm (1.75")

• Approximate Weight: 5kg (11lbs)