QSC E110

It incorporates QSC's DMT (Directivity Matched Transition) design with a wide 85 coverage. When used as a stage monitor, the E110 is angled up at a 55 angle allowing it to be placed near the performer when used on a crowded stage.

E Series loudspeakers will perform very well with any quality, professional power amplifier - but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today's powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

• High output, professional quality sound with 300 W continuous power

• E Series Entertainment System - Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.

• E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:

- For PLD/CXD visit Amplifier Navigator Software

- For GXD visit the GXD Firmware Updater

• Rugged tour-grade textured paint

• Foam-lined perforated steel grill

• Suitable for main PA and stage monitor

• Available U-Style Yoke and M8 rigging kit for permanent installation

• Dual angle pole socket

Model: E110

Configuration: 1 x 10-inch, 2-way, non-powered

Frequency Response (-6 dB): 68Hz - 20kHz

Frequency Range (-10 dB): 50Hz - 20kHz

Power capacity²: continuous/peak: 300 W / 1200 W

Sensitivity: 95 dB, 1 W @ 1 m

Coverage Angle: 85 conical DMT

Output1 (Peak SPL @ 1m): 126 dB

Drivers

LF: 254 mm (10-inch) driver with 64 mm (2.5-inch) voice coil;

HF: 25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver

Nominal Impedance: 8

Cross-over: Full-range only, 1.8 kHz

Input Connections: 2 x NL4, 1 x barrier strip

Enclosure: Multi-angle plywood, black texture paint finish. One top-mounted handle. Perforated, powder-coated steel grille with foam lining.

Mounting and suspension: 9 x M8 suspension points, dual angle, 35 mm pole-socket

Net weight: 20kg / 44lbs

Shipping weight: 23kg / 50lbs

Dimensions: (WxHxD): 330 x 560 x 330 mm, 13 x 22 x 13-inch