Audio Technica BP4025

Designed for broadcast and professional recording, Audio-Technica's BP4025 stereo condenser offers large-diaphragm capsules in an innovative coincident capsule configuration. This allows for a smaller housing while producing an X/Y stereo image with the spatial impact and realism of a live sound field. Ideal for use with professional audio and video equipment, the microphone is fully RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

• Large-diaphragm capsules offer pristine sound quality and exceptionally low noise

• Innovative coincident capsule configuration produces accurate stereo image in smaller housing

• Compact, lightweight design is ideal for camera-mount use

• Excellent channel separation

• Phantom power operation-for use with professional equipment

• Switchable low-frequency roll-off and 10 dB pad

• Includes one balanced cable (two 3-pin XLRM-type connectors at output)

• RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

• ELEMENT: Fixed-charge back plate permanently polarized condenser

• POLAR PATTERN: X/Y Stereo

• FREQUENCY RESPONSE: 20-17,000 Hz

• LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave

• OPEN CIRCUIT SENSITIVITY: -32 dB (25.1 mV) re 1V at 1 Pa

• CHANNEL BALANCE: <2.5 dB

• IMPEDANCE: 170 ohms

• MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D. - 155 dB SPL, with 10 dB pad (nominal)

• DYNAMIC RANGE (typical): 131 dB, 1 kHz at Max SPL

• SIGNAL-TO-NOISE RATIO: 80 dB, 1 kHz at 1 Pa

• PHANTOM POWER REQUIREMENTS: 11-52V DC, 7 mA typical (both channels total)

• SWITCH: Flat, roll-off; 10 dB pad (nominal)

• WEIGHT: 269 g (9.5 oz)

• DIMENSIONS: 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter 21.0 mm (0.83") body diameter

• OUTPUT CONNECTOR: Integral 5-pin XLRM-type

• CABLE: 5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end

• ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; soft protective pouch

• AUDIO-TECHNICA CASE STYLE: S12